CNC MULTI-TORCH PLASMA CUTTING SYSTEM

Cutting And Machnining Flame Cutting

• A pressurized mixture of oxygen and combustible gas is used in this method like propane heats the steel
• The Heat is focused on a very narrow band and the steel melts at 1500 °C
• This process attains the expected cuts quickly
• Due to a rapid thermal cycle of heating and cooling residual stresses and distortion are included

HV SERIES ROLL FORMING MACHINE

• Raw Material: Pre-painted galvanized steel Sheet ASTMA 526/JIS G3302 SGCC or other same class of soft material
• Coil thickness: 0.35 mm – 0.8 mm for 550 MPa, Effective width: 1225 mm
• Line speed: max. 20 m/min
• Uncoiler Load capacity: 6MT

QUICK INTERCHANGE C & Z PUNCHING MACHINE

• With pre levelling, pre punching & pre-cutting device
• Thickness 1.5 mm-3.5 mm for 345 MPa & U.S.T 550 MPa Z100-Z 350, C100-C350
• 25 m/min speed
• 5MT Automatic Decoiler
• Pre-Programmable with +2 mm to corners

HEAVY DUTY H-BEAM WELDING LINE

Web Height	200 - 1500 mm
Web Thickness	5 - 20 mm
Flange Width	200 - 500 mm
Flange Thickness	5 - 25 mm
Workpiece Length	2.5 - 13 m
Web Taper Angle	15°
Welding Type	Single arc twin-wire/single Wire
Welding Speed	300 - 1000 mm/min (Step-less speed adjustment)
Welding Wire Diameter	1.6 mm
Voltage	415 V - 50/60 Hz, 3Ph

DUTY 3 M PRESS BRAKE HEAVY

Capacity

• 1500 KN
• Max Working length - 3150 mm
• Distance between frames - 3000 mm

Shearing:

• Sections can be cut to length or width by cropping or shearing using hydraulic shears. Heavy sections or long plates specialist plate shears
• For smaller plates sections - shearing knives

STANDING SEAM DUAL PROFILE ROOL FORMING MACHINE

Specifications of the Material
Suitable Material	PPGL 345 Mpa
Width of the raw material	610mm 760mm
Thickness	0.5-0.7mm

Specifications of the Machine
Roller Stations	About 12 Stations
Machine Structure	Wire-electrode cutting frame
Roller Material	ASTM1045 chrome plated surface
Cutting	Pre Cut
Body Type	Container Fixed
Seaming Machine	360 Degree